Have a pair of jeans with a lot of wear and some tear in them? Well, usually jeans can be salvaged from the knee down. This is a great way to make skirts for your dolls. The hem is already in place – and probably has a built-in distressed look. Just make sure that area for the waist casing is at least 6 1/2 inches wide (which makes a circumference of at least 13 inches for the waist).
1. Decide how long you want your skirt to be. Do this by measuring from the doll’s waist to the place on her leg where you want it to fall. For and 18 inch doll, about 6 inches will give you a knee length skirt.
2. Measure the skirt length from the hem to the waist area and add 1 inch at the top for the waist casing. I am using 7 inches. (You can choose to have a wider casing if your hem is wider and you want to match the weight of the casing with the hem. Just use the size hem you want to match and add 1/4 inch.)
3. Cut this line with the casing included. Now is the time to add any embellishments, if the jeans don’t have any to begin with. If your skirt is wide enough, you can add a small applique. If it isn’t wide enough, you can use the patch your jeans tutorial to open up the side seam to lay your skirt flat.)
4. All decorated? Good. Now you are going to press the top edge 1/4 inch all around the skirt. Then, press it again 3/4 inches.
5. Sew very close to the pressed edge all the way around the casing, leaving a 1-2 inch opening for threading your elastic.
6. Using two safety pins, thread your 11 inch piece of elastic (for an 18 inch doll) through the skirt casing and stitch the two ends together at the opening.
7. Sew the opening closed and enjoy your skirt!
Note: If you use a kid-size pair of pants, your skirt will have a sleeker look – like a pencil skirt. If you use an adult-size pair of pants, you can have more of a gathered A-line type skirt. You will see how different the looks can be once you’ve done a few of them. This skirt was made with tapered leg pants and looks like a straight skirt.